Getting Ravensdale shipshape for the spring before winter returns

A calm evening at Maryport Marina in Cumbria

Sunshine and slightly higher daytime temperatures over the past week have made it feel as though spring is just around the corner.

It has felt positively spring-like at times, but still very cold at night with frost on the pontoons in the early mornings.

And weather forecasters are warning us to prepare for a cold snap that will bring plunging temperatures and the potential for “significant snowfall” across parts of the UK next week.

The freezing weather system has been labelled “The Beast from the East” because it will be blown in from Siberia.

Ravensdale’s spring clean begins

This week's sunshine revealed just how dirty our 43ft seagoing cruiser Ravensdale had become during the winter, especially when we took our coffee out onto the foredeck to make the most of the good weather.

Phil then decided it was time to start her spring clean, initially using boat wash on her topside and hull, then attacking some of the more stubborn marks with cutting compound.

Phil washing Ravensdale with boat wash

We’re also going to order some more ChineSHINE, an amazing product that works like magic when it comes to removing yellowing from fibreglass gelcoat.

It can also be used on rubber, glass, painted surfaces and antifoul.

And it cleans away rust staining from drainage and exhaust outlets and from around metal fixings.

We discovered it when we had Ravensdale out of the water for antifouling and replacing her anodes last spring and will definitely use it again.

Fitting new aft deck lights

Drilling holes in Ravensdale's radar arch to fit new deck lights

Phil has also fitted new LED lights to illuminate the aft deck.

He had hoped to use the wiring from the existing deck lights, which have not worked since we bought the boat, but this was not possible because the cables had been cut too short, so he had to run new wiring under the radar arch.

Ravensdale's new aft deck lights

While carrying out the electrical work, he decided it was also time to sort out all his electrical tools and spares, so they were spread around the saloon before being packed away again, hopefully more neatly than before 😊

Phil sorting his electrical stuff in Ravensdale's saloon

Other boat jobs

We also pulled out and sorted the contents of the aft deck lockers as we can never find the things we need when we need them. In fact, it frequently takes longer to find the tools or equipment than to complete the task for which they are needed.

Another job completed this week was installing the bilge pump that came out of the engine room in the bow bilges. It was removed from the engine room when we replaced it with a larger, automatic pump.

The former engine room bilge pump now fitted in the bow bilge

And yesterday (Thursday) we got out our generator and started it up to make sure it will run if and when its needed as it hasn’t been used for a while.

We also opened up the bimini – the open-front canvas top over the aft deck, to check for any damage and to give it an airing. 

The bimini itself was sound, but the cover that zips over it when closed needs repairing, so I will have to get my sewing machine out again one day soon.

Ravensdale with the bimini up

Hopefully, it will be easier to patch than the flybridge cover because it’s smaller and will, therefore, be easier to manoeuvre while stitching.

Unusual neighbour

We had an unusual new neighbour overnight on Sunday.

Girl Mia, a shellfishing boat from nearby Whitehaven, tied up on the harbour wall opposite Ravensdale while waiting to be lifted out the following day to have work carried out at the MPM North West boat yard.

Chatting with the neighbours - Girl Mia moored up alongside Ravensdale

We were told it was one of just two of this design made by Sutton Workboats of Newhaven – the other is based at Wexford in Southern Ireland.

Fishing from this vessel must be a far cry from the experience of fishermen of the past and many of those fishing today as the decks are totally enclosed protecting the crew from the elements.

I can only think this is what fishing boats of the future will look like.

A taste of spring

Sunny weather has encouraged me to get out and about with my camera more than usual.

Maryport Marina basking in the winter sunshine

After a prolonged period of strong wind, it continued to blow overnight Friday into Saturday, with average wind speeds up to 25mph and gusts of up to 37mph.

Saturday was our first real taste of spring. It was bright and sunny, but there was still a chilly wind.

Sunday was dry and overcast first thing, then the sun came out and it was quite spring-like again.

There was very little wind, which made a pleasant change and I went out without a jacket or big woolly jumper and left my woolly hat at home for the first time this year.

However, the lovely weather was short lived. The sun disappeared and it started raining mid-afternoon and continued throughout the night.

Monday started off foggy. The fog soon cleared to be replaced by an overcast day with very little wind, which ended with a beautiful sunset.

Sunset reflected in a puddle on Maryport pier

The sun going down over Maryport beach on Monday

Sunset at Maryport Marina on Tuesday evening

It was particularly cold overnight Tuesday, Wednesday and Thursday nights with frost on the pontoons the following mornings.

And the week remained very calm, with glorious sunshine on Wednesday and yesterday (Thursday).

Fleming Square in Maryport

Fishing boats in Maryport Harbour

Maryport basin from the Sea Brows

The view across the Solway Firth to the Scottish hills from Maryport promenade

Another view of Fleming Square at Maryport

Maryport lighthouse 

The Roman Museum on the the Sea Brows at Maryport

A lone seagull on Maryport promenade

The temperatures were only a little higher than last week, reaching 7-8C (45-46F), but the bright sun and lack of wind made it feel considerably warmer.

Today (Friday) is lovely and sunny again, but there's a real chill to the wind, hinting at the cooler weather heading our way and, yes, I did get my woolly jumper and hat out again 😊

Magpie duck sighting

When I wrote last week’s blog, I was disappointed by the disappearance of the little black and white duck that had become a regular visitor to our pontoon and tame enough to eat out of my hand.

The magpie duck eating out of my hand

He flew away when the marina staff pressure washed the pontoon and has not been back since.

However, local man Ronnie Bell posted a photo of the duck on Facebook this week, which he kindly agreed I could use in my blog.

The magpie duck in the River Ellen this week

I asked Ronnie where he’d seen it and it seems it has moved to the nearby river so I’m hoping it will return to the marina one day soon…

Sleeping more soundly thanks to our new automatic bilge pump

Phil tracing the wiring for the old engine room bilge pump

The scary experience of trying to sleep on a boat with a steady flow of water coming in turned fitting an automatic bilge pump into our top priority.

We also have a 24V manually switched bilge pump and another automatic one will be fitted very soon.

Fitting a new bilge pump

We’d been planning to swap the manual bilge pumps on our 43ft cruiser Ravensdale for automatic ones for some time, but there always seemed to be another job that was more pressing.

That all changed the night Phil had to get up every two hours during the night to operate the bilge pump when the stern gland on the port prop shaft developed a fairly serious leak. And, yes, I know we should have taken turns, but he volunteered J

The leak developed after we took our Neptunus 133 out cruising on two consecutive days - Winter cruising joys and the misery caused by flooding bilges

Unfortunately we discovered the rising water level in the engine room quite late in the day and Phil was reluctant to touch it while the boat was in the water in case he made the leak worse.

The manual pump that is being relocated to the bow bilges

This meant we had to wait until the following morning to get help.

It turned out it was just a case of tightening the nuts on the stern gland plate so we'll know what to do if it happens again.

At the same time as discovering the leak, we found out that the bow bilge pump was no longer working so we immediately ordered a new one.

We decided to move the working manual pump in the engine room into the bow bilges and put a new larger automatic pump in the engine room.

After checking the various options online, we went for the 24V Rule-Mate 2000, which can pump 2000 gallons per hour.

Ravensdale's new automatic bilge pump

When it arrived, it became evident that it needed a three-way switch for automatic, manual and off settings so that was duly ordered along with the necessary cabling.

Phil then set about trying to work out how to get the cables from the switch on the helm console to the bilge pump in the engine room.

The existing cables could not be used as there were only two, when three were now needed, and they were not in particularly good condition.

Phil preparing the wiring for the new bilge pump in the engine room

The three-way switch for the new bilge pump

He also fitted the new pump in a more accessible position as the original had been under the diesel tank and at arm’s length from the end of the walkway in the engine room.

It was such a tight spot that Phil asked me to be ready to pull him out by his feet if he got stuck. Thankfully that wasn’t necessary.

And we now have a fully functioning automatic bilge pump in the engine room.

Phil poured water into the bilges with a hosepipe to test it and the pump kicked in when it reached the required level.

Phil pouring water into the engine room bilges

Creaking mooring ropes

Our latest trips out to sea also created another far less worrying but fairly annoying problem – very creaky mooring ropes.

Phil adjusting one of the creaking mooring ropes

We’ve had this happen before and have always found that moving the ropes around reduced the amount of creaking to a tolerable level even in the windiest of weather.

However, for some reason it didn’t work this time. We tied and retied them a number of times, but still the loud creaking continued to keep us awake at night.

In desperation, Phil poured washing up liquid over the ropes on the cleat nearest our cabin one night and they seemed to quieten down a bit. 

The next morning we could see streaks of the yellow washing up liquid on the side of the boat, which have since been washed off, but the ropes still seem to be quieter than they were before it was applied so we’ll know what to do next time J

Patching the flybridge cover

Me sewing a patch on our torn flybridge cover

Meanwhile, I attempted to patch a tear in the canvas cover for the flybridge, which proved much more difficult than I’d expected.

I wasn’t convinced my domestic sewing machine would be up to sewing through the thick canvas, but that proved less of a problem than manoeuvring the bulk of the cover through the machine while turning it round to stitch the four sides of the patch.

I broke the only needle I had that was supposed to be able to handle heavy fabric and had to resort to a leather needle to finish the task.

It’s not the neatest sewing job I’ve ever done, but it has stopped the rain getting in.

Unfortunately, I couldn’t get fabric that was an exact match for the existing cover, but at least the Sunbrella patch is blue and, more importantly, waterproof.

Ravensdale's patchwork effect flybridge cover

There are so many patches on it now that it’s beginning to look like a patchwork quilt so I think a new one may be needed before too long.

However, after the trouble I had trying to sew on a simple patch with my machine, I doubt I’ll attempt making a new one. I’ll probably leave that to the professionals.

Feathered friends

The pair of swans that frequent the marina have been around looking for food again while the berth holder who used to feed them has been away.

The pair of swans in search of food

And the little black and white duck that we first saw back in December of last year was a regular visitor for a couple of days during the past week.

We previously looked it up to find out what type of duck it was and learned that it was a lightweight domesticated breed called a magpie duck.

Keen to find out more now it seemed to be here to stay, I looked it up again to find out whether it was male or female. It turned out to be male because it has curly feathers just above its tail.

On Friday evening, we found him in the water near our boat quacking at us whenever he saw us. We took pity on him and gave his some bread.

The magpie duck on the pontoon by our boat

He was back the following day when we saw him sitting on the pontoon by our steps waiting for us to come out so we tried giving him some bird food we had on board and he stayed around for much of the day.

He seemed to get tamer each time we saw him, running along the pontoon towards us if we called him, but was unwilling to take food directly from us.

On Sunday, he arrived earlier and stayed for most of the day. He allowed us to get closer than before, but still shied away if we got too close.

But, on Monday, he started eating from the palm of my hand.  

The first time the duck ate out of my hand

I was all set to give him a name and declare him our new pet when the marina staff, who had started pressure washing the pontoons the previous day, reached our pontoon.

One of the marina staff pressure washing the pontoons

The duck flew off and hasn’t been back since. Hopefully he’ll return very soon as I was getting used to having him around.

I recently learnt that anatidaephobia is the fear of being watched by a duck, swan or goose. I wonder if there’s a name for the fear of NOT being watched by a duck J

Windy weather

We’ve had a pretty cold week here with some frosty mornings. The temperature has just about managed to stay above 0C (32F) but strong winds have made it feel a lot colder.

And there has been a LOT of wind over the past week so no chance of taking the boat out.

Me checking the wind speed with our anemometer

Low temperatures are fine, but we prefer not to leave the marina if the wind speed is higher than a single figure.

And on many days it would not even have been possible to do so as the marina doesn’t open the gate if there’s too much swell and it has stayed closed on a number of occasions this week.

Water pouring over the closed marina gate

Last Friday was cold and sunny so I took my camera for a walk around the local area.

The sun setting behind clouds over the Solway Firth in Cumbria

Maryport Marina - Ravensdale is just visible in the far right corner of the marina

Grasslot shore at Maryport with with the Scottish hills in the distance

A wider view of Maryport Marina

Saturday, Sunday and Monday were also very chilly with high winds. 

Tuesday was still cold, with rain, sleet and wet snow in the morning and sunshine in the afternoon, which provided another opportunity for a walk with my camera. The snow started falling again as I got back to the boat.

Maryport in Cumbria from Mote Hill with the Scottish hills in the distance

Blue bridge crossing the River Ellen at Maryport

Maryport Harbour

Maryport Marina just before the snow arrived on Tuesday afternoon

Valentine’s Day followed a very cold and windy night with a highest average wind speed of 36mph, gusting up to 48mph, recorded at nearby St Bee’s Head.

The high winds continued throughout the day on Wednesday, peaking late morning with a top average speed of 40mph and gusts up to 57mph.

Yesterday (Thursday) the wind continued to blow throughout the day with the highest average wind speed of 31mph and gusts of up to 44mph recorded at 1pm.

Last night and today (Friday) have also been very windy, but at least the sun's shining today and it's a bit warmer at around 6-7C (43-44F).

So glad we eventually managed to get our mooring ropes to stop creaking or we would’ve been totally shattered due to lack of sleep after such a windy week.

New neighbour

Last night (Thursday) we had a new neighbour for the night.

The Bayard 7 moored on the harbour wall opposite Ravensdale

The Fred. Olsen Windcarrier Bayard 7 has been on the marina slipway having work carried out by the local boat yard for the past fortnight.

It went back in the water yesterday afternoon and was moored up on the harbour wall almost opposite Ravensdale, but it was only there overnight and left when the marina gate opened this morning.

Crunching ice, a frozen shipping channel and a mystery gift

A freezing cold sunrise at Maryport Marina

Plummeting temperatures earlier this week left Ravensdale surrounded by thick ice.

This was the first time since we moved onboard our 43ft seagoing cruiser at Maryport in Cumbria, UK, that we’ve seen most of the water in the marina freeze over.

Ravensdale is reflected in the ice at Maryport Marina

Jigsaw patterns on the ice by the marina slipway

The crazy paving effect on the solid surface of the water looked beautiful, even if it did mean the seabirds that came to visit that day got very cold feet.

A young seagull walking on the ice looking for food

Another seagull walking on the ice at Maryport Marina

Meanwhile, we were lovely and warm inside our boat, thanks to the Webasto diesel heater we had installed after the Eberspacher heater that was onboard when we bought the boat packed up in January leaving us without heat for a month.

The strangest thing during the cold snap was the noise made by the ice scraping and crunching against Ravensdale’s hull, especially when a fishing boat passed very close to her early on Monday morning on its way to the marina slipway.

We were still in bed at the time, which made the sound of the ice moving against the starboard side seem louder than ever as much of our cabin is closer to the water level than the rest of our living space.

Fortunately, I’d been speaking to one of the guys on the fishing boat the previous evening and he'd told me they would be passing us early the following morning so at least we knew what was happening.

With hindsight, I wish I’d got up earlier to see its hull breaking up the ice as it pushed through the frozen water.

Instead, I had to make do with seeing the after effects – a channel through the ice, running from the berth the fishing boat had been in the previous night, past the side of our boat and around to the slipway.

Shards of ice had been pushed under the frozen surface on either side of the channel and some jagged lumps had been pushed up on top of it.

The "shipping channel" created by the fishing boat pushing its way through the ice

The gap in the ice leading from the other end of the marina

Thankfully a local Maryport man, Ronnie Bell, was up earlier than me and took some lovely photos of Ravensdale at sunrise just after the fishing boat had passed by and of the marina, which he has kindly given me permission to use them on my blog.

Broken pieces of ice floating in the channel left by the fishing boat

A pair or swan taking an early morning swim at Maryport Marina

The pontoons became very slippery overnight on Sunday and Monday nights, but the marina salted them so we were still able to get to and from our boat safely.

The coldest temperature we saw on our outdoor thermometer before we went to bed that night was -1.9C, but we knew it had been much colder during the night. And, the following day, the Met Office website showed that it went down to -3.5C in this area in the early hours of Monday morning.

It was so cold that one of the other berth holders here had to climb out of his bow hatch after discovering the hatch at the top of his companionway had frozen shut.

Crazy paving patterns on the ice at Maryport Marina

Smaller patterns in the thicker ice

Until Sunday night, we’d been turning our heating off overnight, but we left it on the eco setting that night and have continued to do so ever since.

Overnight Monday/Tuesday was another very cold night with temperatures going down to -3C.

Since then, it's become much warmer, which inevitably brought rain L

Just before the cold snap, we went out and bought another set of 500 Christmas lights to give Ravensdale’s festive display some added drama and it seems to be proving popular.

We’ve seen lots of people taking photos of the boat from the road around the marina and one little lad was screaming with delight as he had his photo taken with the boat in the background.

I don’t think we’ve seen a single person walk by without stopping to look at the boat, but then our Christmas lights are rather in your face J

Ravensdale's colourful Christmas lights reflected in the still water

We had a lovely surprise when we returned to the boat after a shopping trip last weekend to find a large, square, plastic box in front of the door on our aft deck.

We took it in and opened it up to find a lovely home baked Christmas cake.

There was no note with it and we had no idea who it was from.

The only thing we knew was that it had to have been put there by someone with access to the marina as no one without a fob would be able to get in through the locked gate.

The Christmas cake that mysteriously appeared on our aft deck

We asked around and discovered that another berth holder had been seen heading in Ravensdale’s direction holding a container while we were out.

And shortly afterwards I received a Facebook message saying he hoped the “larl home baked festive treat” hadn’t “freaked” us out.

He explained that he'd been telling his wife, who likes baking for friends and family, about the limited cooking facilities on Ravensdale and, although she has never met us, she decided to bake us a Christmas cake.

We were very pleased and very grateful.

There’s nothing like being on the receiving end of a random act of kindness to restore your faith in human nature J

Meanwhile, we’ve had a new feathered visitor to the marina over the past week.

Phil lays on the pontoon to get a closer look at the unusual duck

A small black and white duck turned up a couple of times. We had no idea what type of duck it was so Phil looked it up and discovered it was a magpie duck.

Apparently, it's a domesticated breed so we were wondering whether it had escaped from somewhere when it disappeared again. We’re now hoping that it’s gone home as the other options aren't so good, especially at this time of year.

As usual, I've been out and about taking photos around the Maryport area.

Maryport lighthouse at low tide

  

Maryport Christmas lights

Fishing boats in Maryport Harbour at low tide

Another fishing boat in Maryport Harbour